Propeller Bluetooth Stack Demo
After going months without a lot of time for working on my hobby projects, I finally had a few free days to work on debugging my embedded Bluetooth stack for the Propeller. I got it working well enough to demo a Serial Port Profile device, implemented using only a Propeller Demo Board and a $2 USB Bluetooth dongle.
Hi, My name is jonathan and our team is currently working on a bluetooth related project. and we are currently quite stuck on our project, do you think you could add me up on msn or email me so that i could ask you some questions? really hope to hear from you soon
Best Regards
Jonathan
jona_lim87@hotmail.com
The forum thread is broken
Would like a bit more info on the hack, such as the exact bluetooth dongle ya’ll hacked, and the pin out wiring…
Sorry, Parallax changed their forum URLs recently and broke everyone’s links
This wasn’t really a hack, per se… I’m using the Bluetooth dongle in the same standard way that a PC uses it when it’s plugged into a USB port. So the pinout is just standard USB, and it should work with any USB Bluetooth adapter.
Cheers,
–Beth
Hello my name is Steffen and my Problem is, the error Code 150 ….are there any ideas to solve the Problem? The connection of the Pins is the same like in usb-fs-host…? I also tested connections without Pulldowns or without all Resistors..but the Problem is still the same…
thanks Steffen
Hello Beth, this projetc is amazing.
Did you use some USB protocol analyzer in hardware or software to capture the USB packets between USB BT gongle and PC ?
BTW, you have a stunning beautiful voice. <3 <3 <3